I need to put a 1.80-by-60 broad mirror on a mortar divider
painted with temper.The mirror will be stuck to the avoiding board at the base,
ie it will nearly be stuck to the floor.
What is the most ideal approach to settle it to the divider
without there being any danger of it falling?
Take after
1 ANSWER
Reply BY EVAMGM
1
Evamgm
In the event that the mirror has a casing they offer in the
handyman shops a few pieces that with 2 brads are stuck in the casing and make
bolster and then again they offer a sort of nail with a bit of white plastic
that are nailed to the divider with a mallet, without Need for penetrate or
taco (so there are no unattractive gaps in the divider). Bolster the plastic
piece on the divider and hit with a sledge the back of the nail that is
embedded in the divider and I can guarantee that it remains completely nailed
and does not move. In this bit of plastic is the place the help that is stuck
in the casing is upheld.
I have hung with this framework a mirror-edge of 1.30 x 0.90
and I have put 3 bolsters (each help holds 15 kg). What's more, it's incredible
in light of the fact that it is not isolated from the divider.
In any handyman shop you are instructed.
The 30 may. 05
Much thanks for dealing with me and sorry for the deferral
in noting in light of the fact that I have been extremely occupied, yet the
"issue" I have is that it is a slanted mirror, without an edge, and I
am worried about the possibility that that when I put it, as it is so enormous,
I fall .On the other hand the mirror on its base will be bolstered. I have been
advised to do it with silicone, won't you fall with the silicone?
Much thanks once more..
1 jun. 05
I've put an immense mirror that goes from one end to the
other (does not bolster anything) in the restroom and was just stuck with
silicone. I asked a similar inquiry that you won't fall? What's more, they
disclosed to me that with a specific end goal to expel it, it is important to
evacuate the tiles. Be that as it may, for your situation they are not tiles
but rather divider. In the event that it were you, I would rub a bit the
divider where you will put the mirror (on the off chance that it is temper it will
be effectively evacuated) so it will get better. When you stick it, tape the
mirror to the divider so it hits well.
No comments:
Post a Comment